Skip to main content
Version: 0.5.0

Ownable

In this tutorial, we will write a simple module that allows us to set its owner. Later, it can be reused to limit access to the contract's critical features.

Framework features​

A module we will write in a minute, will help you master a few Odra features:

  • storing a single value,
  • defining constructors,
  • error handling,
  • defining and emitting events.
  • registering a contact in a test environment,
  • interactions with the test environment,
  • assertions (value, events, errors assertions).

Code​

Before we write any code, we define functionalities we would like to implement.

  1. Module has an initializer that should be called once.
  2. Only the current owner can set a new owner.
  3. Read the current owner.
  4. A function that fails if called by a non-owner account.

Define a module​

use odra::{types::Address, Variable};

#[odra::module]
pub struct Ownable {
    owner: Variable<Address>
}

That was easy, but it is crucial to understand the basic before we move on.

  • L3 - Firstly, we need create a struct called Ownable and apply #[odra::module] to it above.
  • L5 - Then we can define a layout of our module. That is extremely simple - just a single state value. What is most important you can never leave a raw type, you must always wrap it with Variable.

Init the module​

use odra::{
    execution_error, contract_env, Event, types::{Address, event::OdraEvent}
};
...

#[odra::module]
impl Ownable {
    #[odra(init)]
    pub fn init(&mut self, owner: &Address) {
        if self.owner.get().is_some() {
            contract_env::revert(Error::OwnerIsAlreadyInitialized)
        }

        self.owner.set(*owner);
        
        OwnershipChanged {
            prev_owner: None,
            new_owner: *owner
        }
        .emit();
    }
}

execution_error! {
    pub enum Error {
        OwnerIsNotInitialized => 1,
    }
}

#[derive(Event, Debug, PartialEq, Eq)]
pub struct OwnershipChanged {
    pub prev_owner: Option<Address>,
    pub new_owner: Address
}

Ok, we have done a couple of things, let's analyze them one by one:

  • L5 - The impl should be an odra module, so add #[odra::module].
  • L7 - The init function is marked as #[odra(init)] making it a constructor. It matters if we would like to deploy the Ownable module as a standalone contract.
  • L23 - Before we set a new owner, we must assert there was no owner before and raise an error otherwise. For that purpose we defined an Error enum. Notice that the Error enum is defined inside the execution_error macro. It generates, among others, the required Into<ExecutionError> binding.
  • L9-L11 - If the owner has been set already, we call contract_env::revert() function. As an argument we pass Error::OwnerIsNotInitialized.
  • L13 - Then we write the owner passed as an argument to the storage. To do so we call the set() on Variable.
  • L29-L33 - Once the owner is set, we would like to inform the outside world. First step is to define an event struct. The struct must derive from odra::Event. We highly recommend to derive Debug, PartialEq and Eq for testing purpose.
  • L23 - Finally, we create the OwnershipChanged struct and call emit() function on it (import odra::types::event::OdraEvent trait). Hence we set the first owner, we set the prev_owner value to None.

Features implementation​

#[odra::module]
impl Ownable {
    ...

    pub fn ensure_ownership(&self, address: &Address) {
        if Some(address) != self.owner.get().as_ref() {
            contract_env::revert(Error::NotOwner)
        }
    }

    pub fn change_ownership(&mut self, new_owner: &Address) {
        self.ensure_ownership(&contract_env::caller());
        let current_owner = self.get_owner();
        self.owner.set(*new_owner);
        OwnershipChanged {
            prev_owner: Some(current_owner),
            new_owner: *new_owner
        }
        .emit();
    }

    pub fn get_owner(&self) -> Address {
        match self.owner.get() {
            Some(owner) => owner,
            None => contract_env::revert(Error::OwnerIsNotInitialized)
        }
    }
}

execution_error! {
    pub enum Error {
        NotOwner => 1,
        OwnerIsAlreadyInitialized => 2,
        OwnerIsNotInitialized => 3,
    }
}

The above implementation relies on the concepts we have already used in this tutorial, so it should easy for you to get along.

  • L5,L32 - ensure_ownership() is reads the current owner, and reverts if is does not match the input Address. Also we need to update our Error enum adding a new variant NotOwner.
  • L11 - The function defined above can be reused in change_ownership() implementation. We pass to it the current caller, using the contract_env::caller() function. The we update the state, and emit OwnershipChanged.
  • L22,L34 - Lastly, a getter function. As the Variable get() function returns an Option, we need to handle a possible error. If someone call the getter on uninitialized module, it should revert with a new Error variant OwnerIsNotInitialized.

Test​

#[cfg(test)]
mod tests {
    use super::*;
    use odra::{assert_events, test_env};

    fn setup() -> (Address, OwnableRef) {
        let owner = test_env::get_account(0);
        let ownable = OwnableDeployer::init(owner);
        (owner, ownable)
    }

    #[test]
    fn initialization_works() {
        let (owner, ownable) = setup();
        assert_eq!(ownable.get_owner(), owner);
       
        assert_events!(
            ownable,
            OwnershipChanged {
                prev_owner: None,
                new_owner: owner
            }
        );
    }

    #[test]
    fn owner_can_change_ownership() {
        let (owner, mut ownable) = setup();
        let new_owner = test_env::get_account(1);
        
        test_env::set_caller(owner);
        ownable.change_ownership(&new_owner);
        assert_eq!(ownable.get_owner(), new_owner);
        assert_events!(
            ownable,
            OwnershipChanged {
                prev_owner: Some(owner),
                new_owner
            }
        );
    }

    #[test]
    fn non_owner_cannot_change_ownership() {
        let (_, mut ownable) = setup();
        let new_owner = test_env::get_account(1);
        ownable.change_ownership(&new_owner);
        
        test_env::assert_exception(Error::NotOwner, || {
            ownable.change_ownership(&new_owner);
        });
    }
}
  • L6 - Each test case starts with the same initialization process, so for convenience, we defined the setup() function we call as the first statement in each test. Take a look at the signature fn setup() -> (Address, OwnableRef). OwnableRef is a contract reference generated by Odra. This reference allows us call all the defined entrypoints namely: ensure_ownership(), change_ownership(), get_owner(), but not init() which is a constructor.
  • L7 - Now, the module needs an owner, the easiest way is to take one from the test_env. We choose the address of first account (which is the default one).
  • L8 - Odra created for us OwnableDeployer struct which implements all constructor functions. In this case there is just one function - init() which corresponds the function we have implemented in the module.
  • L12 - It is time to define the first test. As you see, it is a regular rust test.
  • L14-15 - Using the setup() function we get the owner, and a reference. We make a standard assertion comparing the owner we know, with the value returned from the contract.
    note

    You may have noticed, we use here the term module interchangeably with contract. The reason is once we deploy our module onto a virtual blockchain it may be considered a contract.

  • L17-23 - On the contract, only the init() function has been called, so we expect one event has been emitted. To assert that, let's use Odra's macro assert_events. As the first argument, pass the contract you want to read events from, followed by as many events as you expect have occurred.
  • L30 - Because we know the initial owner is the 0-th account, we must select a different account. It could be any index from 1 to 19 - the test env predefines 20 accounts.
  • L32 - As mentioned, the default is the 0-th account, if you want to change the executor call the test_env::set_caller() function.
    note

    The caller switch applies only the next contract interaction, the second call will be done as the default account.

  • L49-55 - If a non-owner account tries to change ownership we expect it to fail. To capture the error, call test_env::assert_exception() with the error you expect and a failing block of code.

Summary​

The Ownable module is ready, and we can test it against any defined backend. Theoretically it can be deployed as a standalone contract, but in upcoming tutorials you will see how to use it to compose a more complex contract.

What's next​

In the next tutorial we will implement a ERC20 standard.